Merge branch 'master' into fold-terminalapp-plugin-into-termsupport

MIT-LICENSE.txt

 The MIT License
 
-Copyright (c) 2009-2014 Robby Russell and contributors (see https://github.com/robbyrussell/oh-my-zsh/contributors)
+Copyright (c) 2009-2015 Robby Russell and contributors (see https://github.com/robbyrussell/oh-my-zsh/contributors)
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README.markdown

+![Oh My Zsh](https://s3.amazonaws.com/ohmyzsh/oh-my-zsh-logo.png)
+
+
+Oh My Zsh is an open source, community-driven framework for managing your [zsh](http://www.zsh.org/) configuration. That sounds boring. Let's try this again.
+
+__Oh My Zsh is a way of life!__ Once installed, your terminal prompt will become the talk of the town _or your money back!_ Each time you interact with your command prompt, you'll be able take advantage of the hundreds of bundled plugins and pretty themes. Strangers will come up to you in cafés and ask you, _"that is amazing. are you some sort of genius?"_ Finally, you'll begin to get the sort of attention that you always felt that you deserved. ...or maybe you'll just use the time that you saved to start flossing more often.
+
+To learn more, visit http://ohmyz.sh and/or follow [ohmyzsh](https://twitter.com/ohmyzsh) on Twitter.
+
+## Getting Started
+
+
+### Prerequisites
+
+__Disclaimer:__ _Oh My Zsh works best on Mac OS X and Linux._
+
+* Unix-based operating system (Mac OS X or Linux)
+* [Zsh](http://www.zsh.org) should be installed (v4.3.9 or more recent). If not pre-installed (`zsh --version` to confirm), check the following instruction here: [Installing-ZSH](https://github.com/robbyrussell/oh-my-zsh/wiki/Installing-ZSH)
+* `curl` or `wget` should be installed
+* `git` should be installed
+
+### Basic Installation
+
+Oh My Zsh is installed by running one of the following commands in your terminal. You can install this via the command-line with either `curl` or `wget`.
+
+#### via curl
+
+`sh -c "$(curl -fsSL https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"`
+
+#### via wget
+
+`sh -c "$(wget https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O -)"`
+
+## Using Oh My Zsh
+
+### Plugins
+
+Oh My Zsh comes with a shit load of plugins to take advantage of. You can take a look in the [plugins](https://github.com/robbyrussell/oh-my-zsh/tree/master/plugins) directory and/or the [wiki](https://github.com/robbyrussell/oh-my-zsh/wiki/Plugins) to see what's currently available.
+
+#### Enabling Plugins
+
+If you spot a plugin (or several) that you would like to use with Oh My Zsh, you will need to edit the `~/.zshrc` file. Once you open it with your favorite editor, you'll see a spot to list all the plugins that you'd like Oh My Zsh to load in initialization.
+
+For example, this line might begin to look like...
+
+```shell
+plugins=(git bundler osx rake ruby)
+```
+
+#### Using Plugins
+
+Most plugins (should! we're working on this) include a __README__, which documents how to use them.
+
+### Themes
+
+We'll admit it. Early in the Oh My Zsh world, we may have gotten a bit too theme happy. We have over one hundred themes now bundled. Most of them have [screenshots](https://wiki.github.com/robbyrussell/oh-my-zsh/themes) on the wiki. Check them out!
+
+#### Selecting a Theme
+
+_Robby's theme is the default one. It's not the fanciest one. It's not the simplest one. It's just right (for him)._
+
+Once you find a theme that you want to use, you will need to edit the `~/.zshrc` file. You'll see an environment variable (all caps) in there that looks like:
+
+```shell
+ZSH_THEME="robbyrussell"
+```
+
+To use a different theme, simple change the value to match the name of your desired theme. For example:
+
+```shell
+ZSH_THEME="agnoster" # (this is one of the fancy ones)
+```
+
+Open up a new terminal window and your prompt should look something like...
+
+![Agnoster theme](https://cloud.githubusercontent.com/assets/2618447/6316862/70f58fb6-ba03-11e4-82c9-c083bf9a6574.png)
+
+In case you did not find a suitable theme for your needs, please have a look at the wiki for [more of them](https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes).
+
+## Advanced Topics
+
+If you're the type that likes to get their hands dirty, these sections might resonate.
+
+### Advanced Installation
+
+Some users may want to change the default path, or manually install Oh My Zsh.
+
+#### Custom Directory
+
+The default location is `~/.oh-my-zsh` (hidden in your home directory)
+
+If you'd like to change the install directory with the `ZSH` environment variable, either by running `export ZSH=/your/path` before installing, or by setting it before the end of the install pipeline like this:
+
+```shell
+curl -L https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh | ZSH=~/.dotfiles/zsh sh
+```
+
+#### Manual Installation
+
+##### 1. Clone the repository:
+
+```shell
+git clone git://github.com/robbyrussell/oh-my-zsh.git ~/.oh-my-zsh
+```
+
+##### 2. *Optionally*, backup your existing `~/.zshrc` file:
+
+```shell
+cp ~/.zshrc ~/.zshrc.orig
+```
+
+##### 3. Create a new zsh configuration file
+
+You can create a new zsh config file by copying the template that we included for you.
+
+```shell
+cp ~/.oh-my-zsh/templates/zshrc.zsh-template ~/.zshrc
+```
+
+##### 4. Change your default shell
+
+```shell
+chsh -s /bin/zsh
+```
+
+##### 5. Initialize your new zsh configuration
+
+Once you open up a new terminal window, it should load zsh with Oh My Zsh's configuration.
+
+### Installation Problems
+
+If you have any hiccups installing, here are a few common fixes.
+
+* You _might_ need to modify your `PATH` in `~/.zshrc` if you're not able to find some commands after switching to `oh-my-zsh`.
+* If you installed manually or changed the install location, check the `ZSH` environment variable in `~/.zshrc`.
+
+### Custom Plugins and Themes
+
+If you want to override any of the default behaviors, just add a new file (ending in `.zsh`) in the `custom/` directory.
+
+If you have many functions that go well together, you can put them as a `XYZ.plugin.zsh` file in the `custom/plugins/` directory and then enable this plugin.
+
+If you would like to override the functionality of a plugin distributed with Oh My Zsh, create a plugin of the same name in the `custom/plugins/` directory and it will be loaded instead of the one in `plugins/`.
+
+## Getting Updates
+
+By default, you will be prompted to check for upgrades every few weeks. If you would like `oh-my-zsh` to automatically upgrade itself without prompting you, set the following in your `~/.zshrc`:
+
+```shell
+DISABLE_UPDATE_PROMPT=true
+```
+
+To disable automatic upgrades, set the following in your `~/.zshrc`:
+
+```shell
+DISABLE_AUTO_UPDATE=true
+```
+
+### Manual Updates
+
+If you'd like to upgrade at any point in time (maybe someone just released a new plugin and you don't want to wait a week?) you just need to run:
+
+```shell
+upgrade_oh_my_zsh
+```
+
+Magic!
+
+## Uninstalling Oh My Zsh
+
+Oh My Zsh isn't for everyone. We'll miss you, but we want to make this an easy breakup.
+
+If you want to uninstall `oh-my-zsh`, just run `uninstall_oh_my_zsh` from the command-line. It will remove itself and revert your previous `bash` or `zsh` configuration.
+
+## Contributing
+
+I'm far from being a [Zsh](http://www.zsh.org/) expert and suspect there are many ways to improve – if you have ideas on how to make the configuration easier to maintain (and faster), don't hesitate to fork and send pull requests!
+
+We also need people to test out pull-requests. So take a look through [the open issues](https://github.com/robbyrussell/oh-my-zsh/issues) and help where you can.
+
+### Do NOT send us themes
+
+We have (more than) enough themes for the time being. Please add your theme to the [external themes](https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes) wiki page.
+
+## Contributors
+
+Oh My Zsh has a vibrant community of happy users and delightful contributors. Without all the time and help from our contributors, it wouldn't be so awesome.
+
+Thank you so much!
+
+## Follow Us
+
+We have an [@ohmyzsh](https://twitter.com/ohmyzsh) Twitter account. You should follow it.
+
+## Merchandise
+
+We have [stickers](http://shop.planetargon.com/products/ohmyzsh-stickers-set-of-3-stickers) and [shirts](http://shop.planetargon.com/products/ohmyzsh-t-shirts) for you to show off your love of Oh My Zsh. Again, this will help you become the talk of the town!
+
+## License
+
+Oh My Zsh is released under the [MIT license](https://github.com/robbyrussell/oh-my-zsh/blob/master/MIT-LICENSE.txt).

README.textile

-!https://s3.amazonaws.com/ohmyzsh/oh-my-zsh-logo.png!
-
-@oh-my-zsh@ is an open source, community-driven framework for managing your "Zsh":http://www.zsh.org/ configuration.
-
-It comes bundled with a ton of helpful functions, helpers, plugins, themes, and a few things that make you shout…
-
-bq. "OH MY ZSHELL!"
-
-h2. Setup
-
-@oh-my-zsh@ should work with any recent release of "Zsh":http://www.zsh.org/. The minimum recommended version is *4.3.9*.
-
-If not already installed, you can install "Zsh":http://www.zsh.org/ using the command-line.
-
-h3. The automatic installer… do you trust me?
-
-You can install this via the command-line with either @curl@ or @wget@.
-
-h4. via @curl@:
-
-@curl -L http://install.ohmyz.sh | sh@
-
-h4. via @wget@:
-
-@wget --no-check-certificate http://install.ohmyz.sh -O - | sh@
-
-h4. *Optionally*, change the install directory:
-
-The default location is @~/.oh-my-zsh@ (hidden in your home directory).
-
-You can change the install directory with the @ZSH@ environment variable, either by running @export ZSH=/your/path@ before installing, or by setting it before the end of the install pipeline like this:
-
-@curl -L https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh | ZSH=~/.dotfiles/zsh sh@
-
-h3. The manual way
-
-1. Clone the repository:
-
-@git clone git://github.com/robbyrussell/oh-my-zsh.git ~/.oh-my-zsh@
-
-2. *Optionally*, backup your existing @~/.zshrc@ file:
-
-@cp ~/.zshrc ~/.zshrc.orig@
-
-3. Create a new "Zsh":http://www.zsh.org/ config file by copying the "Zsh":http://www.zsh.org/ template we've provided:
-
-@cp ~/.oh-my-zsh/templates/zshrc.zsh-template ~/.zshrc@
-
-4. Set "Zsh":http://www.zsh.org/ as your default shell:
-
-@chsh -s /bin/zsh@
-
-5. Start or restart "Zsh":http://www.zsh.org/ by opening a new command-line window.
-
-h3. Problems?
-
-You _might_ need to modify your @PATH@ in @~/.zshrc@ if you're not able to find some commands after switching to @oh-my-zsh@.
-
-If you installed manually or changed the install location, check the @ZSH@ environment variable in @~/.zshrc@.
-
-h2. Usage
-
-* enable the plugins you want in your @~/.zshrc@ (take a look at the @plugins/@ directory and the "wiki":https://github.com/robbyrussell/oh-my-zsh/wiki/Plugins to see what's available)
-** example: @plugins=(git osx ruby)@
-* theme support: change the @ZSH_THEME@ environment variable in @~/.zshrc@
-** take a look at the @themes/@ directory and the "wiki":https://wiki.github.com/robbyrussell/oh-my-zsh/themes to see what comes bundled with @oh-my-zsh@
-* & much, much more… take a look at the @lib/@ directory to see what @oh-my-zsh@ has to offer…
-
-h2. Useful
-
-The "refcard":http://www.bash2zsh.com/zsh_refcard/refcard.pdf is pretty useful for tips.
-
-h3. Customization
-
-If you want to override any of the default behaviors, just add a new file (ending in @.zsh@) in the @custom/@ directory.
-
-If you have many functions that go well together, you can put them as a @*.plugin.zsh@ file in the @custom/plugins/@ directory and then enable this plugin (see '"Usage":https://github.com/robbyrussell/oh-my-zsh#usage' above).
-
-If you would like to override the functionality of a plugin distributed with @oh-my-zsh@, create a plugin of the same name in the @custom/plugins/@ directory and it will be loaded instead of the one in @plugins/@.
-
-h3. Updates
-
-By default you will be prompted to check for upgrades. If you would like @oh-my-zsh@ to automatically upgrade itself without prompting you, set the following in your @~/.zshrc@:
-
-@DISABLE_UPDATE_PROMPT=true@
-
-To disable upgrades entirely, set the following in your @~/.zshrc@:
-
-@DISABLE_AUTO_UPDATE=true@
-
-To upgrade directly from the command-line, just run @upgrade_oh_my_zsh@.
-
-h3. Uninstalling
-
-If you want to uninstall @oh-my-zsh@, just run @uninstall_oh_my_zsh@ from the command-line and it'll remove itself and revert you to @bash@ (or your previous "Zsh":http://www.zsh.org/ configuration).
-
-h2. Help out!
-
-I'm far from being a "Zsh":http://www.zsh.org/ expert and suspect there are many ways to improve – if you have ideas on how to make the configuration easier to maintain (and faster), don't hesitate to fork and send pull requests!
-
-h3. (Don't) send us your theme (for now)!
-
--I'm hoping to collect a bunch of themes – you can see existing ones in the @themes/@ directory.-
-
-We have enough themes for the time being. Please fork the project and add on in there – you can let people know how to grab it from there.
-
-h2. Contributors
-
-This project wouldn't exist without all of our awesome users and contributors: "view our growing list of contributors":https://github.com/robbyrussell/oh-my-zsh/contributors
-
-Thank you so much!

lib/completion.zsh

@@ -15,7 +15,12 @@ if [ "x$CASE_SENSITIVE" = "xtrue" ]; then
   zstyle ':completion:*' matcher-list 'r:|[._-]=* r:|=*' 'l:|=* r:|=*'
   unset CASE_SENSITIVE
 else
-  zstyle ':completion:*' matcher-list 'm:{a-zA-Z}={A-Za-z}' 'r:|[._-]=* r:|=*' 'l:|=* r:|=*'
+  if [ "x$HYPHEN_INSENSITIVE" = "xtrue" ]; then
+    zstyle ':completion:*' matcher-list 'm:{a-zA-Z-_}={A-Za-z_-}' 'r:|[._-]=* r:|=*' 'l:|=* r:|=*'
+    unset HYPHEN_INSENSITIVE
+  else
+    zstyle ':completion:*' matcher-list 'm:{a-zA-Z}={A-Za-z}' 'r:|[._-]=* r:|=*' 'l:|=* r:|=*'
+  fi
 fi
 
 zstyle ':completion:*' list-colors ''
@@ -34,7 +39,6 @@ fi
 
 # disable named-directories autocompletion
 zstyle ':completion:*:cd:*' tag-order local-directories directory-stack path-directories
-cdpath=(.)
 
 # Use caching so that commands like apt and dpkg complete are useable
 zstyle ':completion::complete:*' use-cache 1

lib/directories.zsh

@@ -24,9 +24,9 @@ alias d='dirs -v | head -10'
 
 # List directory contents
 alias lsa='ls -lah'
-alias l='ls -la'
-alias ll='ls -l'
-alias la='ls -lA'
+alias l='ls -lah'
+alias ll='ls -lh'
+alias la='ls -lAh'
 
 # Push and pop directories on directory stack
 alias pu='pushd'

lib/functions.zsh

@@ -15,6 +15,22 @@ function take() {
   cd $1
 }
 
+function open_command() {
+  local open_cmd
+
+  # define the open command
+  case "$OSTYPE" in
+    darwin*)  open_cmd="open" ;;
+    cygwin*)  open_cmd="cygstart" ;;
+    linux*)   open_cmd="xdg-open" ;;
+    *)        echo "Platform $OSTYPE not supported"
+              return 1
+              ;;
+  esac
+
+  nohup $open_cmd "$@" &>/dev/null
+}
+
 #
 # Get the value of an alias.
 #

lib/git.zsh

@@ -36,24 +36,27 @@ git_remote_status() {
         ahead=$(command git rev-list ${hook_com[branch]}@{upstream}..HEAD 2>/dev/null | wc -l)
         behind=$(command git rev-list HEAD..${hook_com[branch]}@{upstream} 2>/dev/null | wc -l)
 
-        if [ $ahead -eq 0 ] && [ $behind -gt 0 ]
+        if [ $ahead -gt 0 ] && [ $behind -eq 0 ]
         then
-            echo "$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE"
-        elif [ $ahead -gt 0 ] && [ $behind -eq 0 ]
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE$((ahead))%{$reset_color%}"
+        elif [ $behind -gt 0 ] && [ $ahead -eq 0 ] 
         then
-            echo "$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE"
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE$((behind))%{$reset_color%}"
         elif [ $ahead -gt 0 ] && [ $behind -gt 0 ]
         then
-            echo "$ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE"
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE$((ahead))%{$reset_color%}$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE$((behind))%{$reset_color%}"
         fi
-    fi
-}
 
-# Checks if there are commits ahead from remote
-function git_prompt_ahead() {
-  if $(echo "$(command git log @{upstream}..HEAD 2> /dev/null)" | grep '^commit' &> /dev/null); then
-    echo "$ZSH_THEME_GIT_PROMPT_AHEAD"
-  fi
+        if [ $ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_DETAILED ]
+        then
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_PREFIX$remote$git_remote_status_detailed$ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_SUFFIX"
+        fi
+
+        echo $git_remote_status
+    fi
 }
 
 # Gets the number of commits ahead from remote
@@ -64,6 +67,29 @@ function git_commits_ahead() {
   fi
 }
 
+# Outputs if current branch is ahead of remote
+function git_prompt_ahead() {
+  if [[ -n "$(command git rev-list origin/$(current_branch)..HEAD 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_AHEAD"
+  fi
+}
+
+# Outputs if current branch is behind remote
+function git_prompt_behind() {
+  if [[ -n "$(command git rev-list HEAD..origin/$(current_branch) 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_BEHIND"
+  fi
+}
+
+# Outputs if current branch exists on remote or not
+function git_prompt_remote() {
+  if [[ -n "$(command git show-ref origin/$(current_branch) 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_REMOTE_EXISTS"
+  else
+    echo "$ZSH_THEME_GIT_PROMPT_REMOTE_MISSING"
+  fi
+}
+
 # Formats prompt string for current git commit short SHA
 function git_prompt_short_sha() {
   SHA=$(command git rev-parse --short HEAD 2> /dev/null) && echo "$ZSH_THEME_GIT_PROMPT_SHA_BEFORE$SHA$ZSH_THEME_GIT_PROMPT_SHA_AFTER"

lib/grep.zsh

@@ -3,8 +3,12 @@ grep-flag-available() {
     echo | grep $1 "" >/dev/null 2>&1
 }
 
+GREP_OPTIONS=""
+
 # color grep results
-GREP_OPTIONS="--color=auto"
+if grep-flag-available --color=auto; then
+    GREP_OPTIONS+=" --color=auto"
+fi
 
 # ignore VCS folders (if the necessary grep flags are available)
 VCS_FOLDERS="{.bzr,.cvs,.git,.hg,.svn}"

lib/misc.zsh

-## smart urls
-autoload -U url-quote-magic
-zle -N self-insert url-quote-magic
+## Load smart urls if available
+for d in $fpath; do
+	if [[ -e "$d/url-quote-magic" ]]; then
+		autoload -U url-quote-magic
+		zle -N self-insert url-quote-magic
+	fi
+done
 
 ## jobs
 setopt long_list_jobs
@@ -20,3 +24,6 @@ alias afind='ack-grep -il'
 if [[ -z "$LC_CTYPE" && -z "$LC_ALL" ]]; then
 	export LC_CTYPE=${LANG%%:*} # pick the first entry from LANG
 fi
+
+# recognize comments
+setopt interactivecomments

lib/termsupport.zsh

@@ -8,6 +8,8 @@
 # Limited support for Apple Terminal (Terminal can't set window and tab separately)
 function title {
   emulate -L zsh
+  setopt prompt_subst
+  
   [[ "$EMACS" == *term* ]] && return
 
   # if $2 is unset use $1 as default
@@ -24,6 +26,10 @@ function title {
 
 ZSH_THEME_TERM_TAB_TITLE_IDLE="%15<..<%~%<<" #15 char left truncated PWD
 ZSH_THEME_TERM_TITLE_IDLE="%n@%m: %~"
+# Avoid duplication of directory in terminals with independent dir display
+if [[ $TERM_PROGRAM == Apple_Terminal ]]; then
+  ZSH_THEME_TERM_TITLE_IDLE="%n@%m"
+fi
 
 # Runs before showing the prompt
 function omz_termsupport_precmd {
@@ -45,7 +51,7 @@ function omz_termsupport_preexec {
   setopt extended_glob
 
   # cmd name only, or if this is sudo or ssh, the next cmd
-  local CMD=${1[(wr)^(*=*|sudo|ssh|rake|-*)]:gs/%/%%}
+  local CMD=${1[(wr)^(*=*|sudo|ssh|mosh|rake|-*)]:gs/%/%%}
   local LINE="${2:gs/%/%%}"
 
   title '$CMD' '%100>...>$LINE%<<'

oh-my-zsh.sh

@@ -14,7 +14,7 @@ if [[ -z "$ZSH_CUSTOM" ]]; then
     ZSH_CUSTOM="$ZSH/custom"
 fi
 
-# Set ZSH_CACHE_DIR to the path where cache files sould be created
+# Set ZSH_CACHE_DIR to the path where cache files should be created
 # or else we will use the default cache/
 if [[ -z "$ZSH_CACHE_DIR" ]]; then
   ZSH_CACHE_DIR="$ZSH/cache/"

plugins/adb/_adb

@@ -16,13 +16,22 @@ _1st_arguments=(
 'help:show the help message'
 'install:push this package file to the device and install it'
 'jdwp:list PIDs of processes hosting a JDWP transport'
-'logcat:View device log'
+'kill-server:kill the server if it is running'
+'logcat:view device log'
 'pull:copy file/dir from device'
 'push:copy file/dir to device'
+'reboot:reboots the device, optionally into the bootloader or recovery program'
+'reboot-bootloader:reboots the device into the bootloader'
+'remount:remounts the partitions on the device read-write'
+'root:restarts the adbd daemon with root permissions'
+'sideload:push a ZIP to device and install it'
 'shell:run remote shell interactively'
 'sync:copy host->device only if changed (-l means list but dont copy)'
+'start-server:ensure that there is a server running'
+'tcpip:restart host adb in tcpip mode'
 'uninstall:remove this app package from the device'
 'version:show version num'
+'wait-for-device:block until device is online'
 )
 
 local expl

plugins/apache2-macports/README.md

+## APACHE2 MACPORTS PLUGIN
+
+
+---
+
+### FEATURES
+
+| Alias          | Function                                                                       | Description           |
+|:--------------:|:-------------------------------------------------------------------------------|----------------------:|
+| apache2restart | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper restart | Restart apache daemon |
+| apache2start   | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper start   | Start apache daemon   |
+| apache2stop    | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper stop    | Stop apache daemon    |
+
+---
+
+### CONTRIBUTORS
+ - Alexander Rinass (alex@rinass.net)
+
+---

plugins/archlinux/README.md

+## ARCHLINUX PLUGIN
+
+
+---
+
+### FEATURES
+
+| Alias        | Function                                | Description                                                                                                         |
+|:------------:|-----------------------------------------|:--------------------------------------------------------------------------------------------------------------------|
+| pacin        | sudo pacman -S                          | Install specific package(s) from the repositories                                                                   |
+| pacins       | sudo pacman -U                          | Install specific package not from the repositories but from a file                                                  |
+| pacinsd      | sudo pacman -S --asdeps                 | Install given package(s) as dependencies of another package                                                         |
+| pacloc       | pacman -Qi                              | Display information about a given package in the local database                                                     |
+| paclocs      | pacman -Qs                              | Search for package(s) in the local database                                                                         |
+| paclsorphans | sudo pacman -Qdt'                       | List all orphaned packages                                                                                          |
+| pacmir       | sudo pacman -Syy                        | Force refresh of all package lists after updating /etc/pacman.d/mirrorlist                                          |
+| pacre        | sudo pacman -R                          | Remove the specified package(s), retaining its configuration(s) and required dependencies                           |
+| pacrem       | sudo pacman -Rns                        | Remove the specified package(s), its configuration(s) and unneeded dependencies                                     |
+| pacrep       | pacman -Si                              | Display information about a given package in the repositories                                                       |
+| pacreps      | pacman -Ss                              | Search for package(s) in the repositories                                                                           |
+| pacrmorphans | sudo pacman -Rs $(pacman -Qtdq)'        | Delete all orphaned packages                                                                                        |
+| pacupd       | sudo pacman -Sy && sudo abs && sudo aur | Update and refresh the local package, ABS and AUR databases against repositories                                    |
+| pacupd       | sudo pacman -Sy && sudo abs             | Update and refresh the local package and ABS databases against repositories                                         |
+| pacupd       | sudo pacman -Sy && sudo aur             | Update and refresh the local package and AUR databases against repositories                                         |
+| pacupd       | sudo pacman -Sy                         | Update and refresh the local package database against repositories                                                  |
+| pacupg       | sudo pacman -Syu                        | Synchronize with repositories before upgrading packages that are out of date on the local system.                   |
+| yaconf       | yaourt -C                               | Fix all configuration files with vimdiff                                                                            |
+| yain         | yaourt -S                               | Install specific package(s) from the repositories                                                                   |
+| yains        | yaourt -U                               | Install specific package not from the repositories but from a file                                                  |
+| yainsd       | yaourt -S --asdeps                      | Install given package(s) as dependencies of another package                                                         |
+| yaloc        | yaourt -Qi                              | Display information about a given package in the local database                                                     |
+| yalocs       | yaourt -Qs                              | Search for package(s) in the local database                                                                         |
+| yalst        | yaourt -Qe                              | List installed packages, even those installed from AUR (they're tagged as "local")                                  |
+| yamir        | yaourt -Syy                             | Force refresh of all package lists after updating /etc/pacman.d/mirrorlist                                          |
+| yaorph       | yaourt -Qtd                             | Remove orphans using yaourt                                                                                         |
+| yare         | yaourt -R                               | Remove the specified package(s), retaining its configuration(s) and required dependencies                           |
+| yarem        | yaourt -Rns                             | Remove the specified package(s), its configuration(s) and unneeded dependencies                                     |
+| yarep        | yaourt -Si                              | Display information about a given package in the repositories                                                       |
+| yareps       | yaourt -Ss                              | Search for package(s) in the repositories                                                                           |
+| yasu         | yaourt --sucre                          | Same as yaupg, but without confirmation                                                                             |
+| yaupd        | yaourt -Sy && sudo abs && sudo aur      | Update and refresh the local package, ABS and AUR databases against repositories                                    |
+| yaupd        | yaourt -Sy && sudo abs                  | Update and refresh the local package and ABS databases against repositories                                         |
+| yaupd        | yaourt -Sy && sudo aur                  | Update and refresh the local package and AUR databases against repositories                                         |
+| yaupd        | yaourt -Sy                              | Update and refresh the local package database against repositories                                                  |
+| yaupg        | yaourt -Syua                            | Synchronize with repositories before upgrading packages (AUR packages too) that are out of date on the local system |
+
+| Function       | Description                                                                                                       |
+|----------------|:------------------------------------------------------------------------------------------------------------------|
+| pacdisowned    | List all disowned files in your system                                                                            |
+| paclist        | List all installed packages with a short description - [Source](https://bbs.archlinux.org/viewtopic.php?id=93683) |
+| pacmanallkeys  | Get all keys for developers and trusted users                                                                     |
+| pacmansignkeys |                                                                                                                   |
+
+---
+
+### CONTRIBUTORS
+ - Benjamin Boudreau - dreurmail@gmail.com
+ - Celso Miranda - contacto@celsomiranda.net
+ - KhasMek - Boushh@gmail.com
+ - Martin Putniorz - mputniorz@gmail.com
+ - MatthR3D - matthr3d@gmail.com
+ - ornicar - thibault.duplessis@gmail.com
+
+---

plugins/archlinux/archlinux.plugin.zsh

@@ -2,7 +2,7 @@
 # Usage is also described at https://github.com/robbyrussell/oh-my-zsh/wiki/Plugins
 
 # Look for yaourt, and add some useful functions if we have it.
-if [[ -x `which yaourt` ]]; then
+if [[ -x `command -v yaourt` ]]; then
   upgrade () {
     yaourt -Syu
   }
@@ -21,11 +21,11 @@ if [[ -x `which yaourt` ]]; then
   alias yalst='yaourt -Qe'         # List installed packages, even those installed from AUR (they're tagged as "local")
   alias yaorph='yaourt -Qtd'       # Remove orphans using yaourt
   # Additional yaourt alias examples
-  if [[ -x `which abs` && -x `which aur` ]]; then
+  if [[ -x `command -v abs` && -x `command -v aur` ]]; then
     alias yaupd='yaourt -Sy && sudo abs && sudo aur'  # Update and refresh the local package, ABS and AUR databases against repositories
-  elif [[ -x `which abs` ]]; then
+  elif [[ -x `command -v abs` ]]; then
     alias yaupd='yaourt -Sy && sudo abs'   # Update and refresh the local package and ABS databases against repositories
-  elif [[ -x `which aur` ]]; then
+  elif [[ -x `command -v aur` ]]; then
     alias yaupd='yaourt -Sy && sudo aur'   # Update and refresh the local package and AUR databases against repositories
   else
     alias yaupd='yaourt -Sy'               # Update and refresh the local package database against repositories
@@ -49,11 +49,11 @@ alias pacreps='pacman -Ss'             # Search for package(s) in the repositori
 alias pacloc='pacman -Qi'              # Display information about a given package in the local database
 alias paclocs='pacman -Qs'             # Search for package(s) in the local database
 # Additional pacman alias examples
-if [[ -x `which abs` && -x `which aur` ]]; then
+if [[ -x `command -v abs` && -x `command -v aur` ]]; then
   alias pacupd='sudo pacman -Sy && sudo abs && sudo aur'  # Update and refresh the local package, ABS and AUR databases against repositories
-elif [[ -x `which abs` ]]; then
+elif [[ -x `command -v abs` ]]; then
   alias pacupd='sudo pacman -Sy && sudo abs'              # Update and refresh the local package and ABS databases against repositories
-elif [[ -x `which aur` ]]; then
+elif [[ -x `command -v aur` ]]; then
   alias pacupd='sudo pacman -Sy && sudo aur'              # Update and refresh the local package and AUR databases against repositories
 else
   alias pacupd='sudo pacman -Sy'     # Update and refresh the local package database against repositories
@@ -63,7 +63,7 @@ alias pacmir='sudo pacman -Syy'                # Force refresh of all package li
 
 # https://bbs.archlinux.org/viewtopic.php?id=93683
 paclist() {
-  sudo pacman -Qei $(pacman -Qu|cut -d" " -f 1)|awk ' BEGIN {FS=":"}/^Name/{printf("\033[1;36m%s\033[1;37m", $2)}/^Description/{print $2}'
+  LC_ALL=C pacman -Qei $(pacman -Qu|cut -d" " -f 1)|awk ' BEGIN {FS=":"}/^Name/{printf("\033[1;36m%s\033[1;37m", $2)}/^Description/{print $2}'
 }
 
 alias paclsorphans='sudo pacman -Qdt'

plugins/atom/README.md

+## atom
+
+Plugin for Atom, a cross platform text and code editor, available for Linux, Mac OS X, and Windows.
+
+### Requirements
+
+ * [Atom](https://atom.io/)
+
+### Usage
+
+ * If `at` command is called without an argument, launch Atom
+
+ * If `at` is passed a directory, `cd` to it and open it in Atom
+
+ * If `at` is passed a file, open it in Atom
+
+ * if `att` command is called, it is equivalent to `at .`, opening the current folder in Atom

plugins/aws/aws.plugin.zsh

@@ -13,7 +13,8 @@ function agp {
 }
 function asp {
   export AWS_DEFAULT_PROFILE=$1
-  export RPROMPT="<aws:$AWS_DEFAULT_PROFILE>"
+  export AWS_PROFILE=$1
+  export RPROMPT="<aws:$AWS_DEFAULT_PROFILE>$RPROMPT"
 }
 function aws_profiles {
   reply=($(grep profile $AWS_HOME/config|sed -e 's/.*profile \([a-zA-Z0-9_-]*\).*/\1/'))
@@ -22,7 +23,7 @@ function aws_profiles {
 compctl -K aws_profiles asp
 
 if _homebrew-installed && _awscli-homebrew-installed ; then
-  _aws_zsh_completer_path=$(brew --prefix)/opt/awscli/libexec/bin/aws_zsh_completer.sh
+  _aws_zsh_completer_path=$(brew --prefix awscli)/libexec/bin/aws_zsh_completer.sh
 else
   _aws_zsh_completer_path=$(which aws_zsh_completer.sh)
 fi

plugins/bgnotify/README.md

+# bgnotify zsh plugin
+
+cross-platform background notifications for long running commands! Supports OSX and Ubuntu linux.
+
+Standalone homepage: [t413/zsh-background-notify](https://github.com/t413/zsh-background-notify)
+
+----------------------------------
+
+## How to use!
+
+Just add bgnotify to your plugins list in your `.zshrc`
+
+- On OS X you'll need [terminal-notifer](https://github.com/alloy/terminal-notifier)
+  * `brew install terminal-notifier` (or `gem install terminal-notifier`)
+- On ubuntu you're already all set!
+- On windows you can use [notifu](http://www.paralint.com/projects/notifu/) or the Cygwin Ports libnotify package
+
+
+## Screenshots
+
+**Linux**
+
+![screenshot from 2014-11-07 15 58 36](https://cloud.githubusercontent.com/assets/326829/4962187/256b465c-66da-11e4-927d-cc2fc105e31f.png)
+
+**OS X**
+
+![screenshot 2014-11-08 14 15 12](https://cloud.githubusercontent.com/assets/326829/4965780/19fa3eac-6795-11e4-8ed6-0355711123a9.png)
+
+**Windows**
+
+![screenshot from 2014-11-07 15 55 00](https://cloud.githubusercontent.com/assets/326829/4962159/a2625ca0-66d9-11e4-9e91-c5834913190e.png)
+
+
+## Configuration
+
+One can configure a few things:
+
+- `bgnotify_threshold` sets the notification threshold time (default 6 seconds)
+- `function bgnotify_formatted` lets you change the notification
+
+Use these by adding a function definition before the your call to source. Example:
+
+~~~ sh
+bgnotify_threshold=4  ## set your own notification threshold
+
+function bgnotify_formatted {
+  ## $1=exit_status, $2=command, $3=elapsed_time
+  [ $1 -eq 0 ] && title="Holy Smokes Batman!" || title="Holy Graf Zeppelin!"
+  bgnotify "$title -- after $3 s" "$2";
+}
+
+plugins=(git bgnotify)  ## add to plugins list
+source $ZSH/oh-my-zsh.sh  ## existing source call
+~~~

plugins/bgnotify/bgnotify.plugin.zsh

+#!/usr/bin/env zsh
+
+## setup ##
+
+[[ -o interactive ]] || return #interactive only!
+zmodload zsh/datetime || { print "can't load zsh/datetime"; return } # faster than date()
+autoload -Uz add-zsh-hook || { print "can't add zsh hook!"; return }
+
+(( ${+bgnotify_threshold} )) || bgnotify_threshold=5 #default 10 seconds
+
+
+## definitions ##
+
+if ! (type bgnotify_formatted | grep -q 'function'); then
+  function bgnotify_formatted {
+    ## exit_status, command, elapsed_time
+    [ $1 -eq 0 ] && title="#win (took $3 s)" || title="#fail (took $3 s)"
+    bgnotify "$title" "$2"
+  }
+fi
+
+currentWindowId () {
+  if hash osascript 2>/dev/null; then #osx
+    osascript -e 'tell application (path to frontmost application as text) to id of front window' 2&> /dev/null || echo "0"
+  elif hash notify-send 2>/dev/null; then #ubuntu!
+    xprop -root | awk '/NET_ACTIVE_WINDOW/ { print $5; exit }'
+  else
+    echo $EPOCHSECONDS #fallback for windows
+  fi
+}
+
+bgnotify () {
+  if hash terminal-notifier 2>/dev/null; then #osx
+    terminal-notifier -message "$2" -title "$1"
+  elif hash growlnotify 2>/dev/null; then #osx growl
+    growlnotify -m "$1" "$2"
+  elif hash notify-send 2>/dev/null; then #ubuntu!
+    notify-send "$1" "$2"
+  elif hash notifu 2>/dev/null; then #cygwyn support!
+    notifu /m "$2" /p "$1"
+  fi
+}
+
+
+## Zsh hooks ##
+
+bgnotify_begin() {
+  bgnotify_timestamp=$EPOCHSECONDS
+  bgnotify_lastcmd=$1
+  bgnotify_windowid=$(currentWindowId)
+}
+
+bgnotify_end() {
+  didexit=$?
+  elapsed=$(( EPOCHSECONDS - bgnotify_timestamp ))
+  past_threshold=$(( elapsed >= bgnotify_threshold ))
+  if (( bgnotify_timestamp > 0 )) && (( past_threshold )); then
+    if [ $(currentWindowId) != "$bgnotify_windowid" ]; then
+      print -n "\a"
+      bgnotify_formatted "$didexit" "$bgnotify_lastcmd" "$elapsed"
+    fi
+  fi
+  bgnotify_timestamp=0 #reset it to 0!
+}
+
+add-zsh-hook preexec bgnotify_begin
+add-zsh-hook precmd bgnotify_end

plugins/boot2docker/README.md

+## Boot2docker autocomplete plugin
+
+- Adds autocomplete options for all boot2docker commands.
+
+
+Maintainer : Manfred Touron ([@moul](https://github.com/moul))

plugins/boot2docker/_boot2docker

+#compdef boot2docker
+
+# Boot2docker autocompletion for oh-my-zsh
+# Requires: Boot2docker installed
+# Author: Manfred Touron (@moul)
+
+local -a _1st_arguments
+_1st_arguments=(
+   "init":"Create a new Boot2Docker VM."
+   "up":"Start VM from any states."
+   "start":"Start VM from any states."
+   "boot":"Start VM from any states."
+   "ssh":"[ssh-command] Login to VM via SSH."
+   "save":"Suspend VM and save state to disk."
+   "suspend":"Suspend VM and save state to disk."
+   "down":"Gracefully shutdown the VM."
+   "stop":"Gracefully shutdown the VM."
+   "halt":"Gracefully shutdown the VM."
+   "restart":"Gracefully reboot the VM."
+   "poweroff":"Forcefully power off the VM (may corrupt disk image)."
+   "reset":"Forcefully power cycle the VM (may corrupt disk image)."
+   "delete":"Delete Boot2Docker VM and its disk image."
+   "destroy":"Delete Boot2Docker VM and its disk image."
+   "config":"Show selected profile file settings."
+   "cfg":"Show selected profile file settings."
+   "info":"Display detailed information of VM."
+   "ip":"Display the IP address of the VM's Host-only network."
+   "socket":"Display the DOCKER_HOST socket to connect to."
+   "shellinit":"Display the shell command to set up the Docker client."
+   "status":"Display current state of VM."
+   "download":"Download Boot2Docker ISO image."
+   "upgrade":"Upgrade the Boot2Docker ISO image (restart if running)."
+   "version":"Display version information."
+)
+
+_arguments \
+  '(--basevmdk)--basevmdk[Path to VMDK to use as base for persistent partition]' \
+  '(--cpus)'{-c,--cpus}'[number of CPUs for boot2docker.]' \
+  '(--clobber)--clobber[overwrite Docker client binary on boot2docker upgrade]' \
+  '(--dhcp)--dhcp[enable VirtualBox host-only network DHCP.]' \
+  '(--dhcpip)--dhcpip[VirtualBox host-only network DHCP server address.]' \
+  '(-s --disksize)'{-s,--disksize}'[boot2docker disk image size (in MB).]' \
+  '(--dockerport)--dockerport[host Docker port (forward to port 2376 in VM). (deprecated - use with care)]' \
+  '(--driver)--driver[hypervisor driver.]' \
+  '(--force-upgrade-download)--force-upgrade-download[always download on boot2docker upgrade, never skip.]' \
+  '(--hostip)--hostip[VirtualBox host-only network IP address.]' \
+  '(--iso)--iso[path to boot2docker ISO image.]' \
+  '(--iso-url)--iso-url[/api.github.com/repos/boot2docker/boot2docker/releases": source URL to provision the boot2docker ISO image.]' \
+  '(--lowerip)--lowerip[VirtualBox host-only network DHCP lower bound.]' \
+  '(--memory)'{-m,--memory}'[virtual machine memory size (in MB).]' \
+  '(--netmask)--netmask[VirtualBox host-only network mask.]' \
+  '(--no-dummy)--no-dummy[Example parameter for the dummy driver.]' \
+  '(--retries)--retries[number of port knocking retries during 'start']' \
+  '(--serial)--serial[try serial console to get IP address (experimental)]' \
+  '(--serialfile)--serialfile[path to the serial socket/pipe.]' \
+  '(--ssh)--ssh[path to SSH client utility.]' \
+  '(--ssh-keygen)--ssh-keygen[path to ssh-keygen utility.]' \
+  '(--sshkey)--sshkey[path to SSH key to use.]' \
+  '(--sshport)--sshport[host SSH port (forward to port 22 in VM).]' \
+  '(--upperip)--upperip[VirtualBox host-only network DHCP upper bound.]' \
+  '(--vbm)--vbm[path to VirtualBox management utility.]' \
+  '(--vbox-share)--vbox-share[(defaults to "/Users=Users" if no shares are specified; use "disable" to explicitly prevent any shares from being created) List of directories to share during "up|start|boot" via VirtualBox Guest Additions, with optional labels]' \
+  '(--verbose)'{-v,--verbose}'[display verbose command invocations.]' \
+  '(--vm)--vm[virtual machine name.]' \
+  '(--waittime)--waittime[Time in milliseconds to wait between port knocking retries during 'start']' \
+  '*:: :->subcmds' && return 0
+
+#_arguments '*:: :->command'
+
+if (( CURRENT == 1 )); then
+    _describe -t commands "boot2docker command" _1st_arguments
+    return
+fi

plugins/brew/_brew

@@ -35,6 +35,7 @@ _1st_arguments=(
   'info:information about a formula'
   'install:install a formula'
   'reinstall:install a formula anew; re-using its current options'
+  'leaves:show installed formulae that are not dependencies of another installed formula'
   'link:link a formula'
   'list:list files in a formula or not-installed formulae'
   'log:git commit log for a formula'

plugins/brew/brew.plugin.zsh

 alias brews='brew list -1'
-alias bubu="brew update && brew upgrade && brew cleanup"
+alias bubo='brew update && brew outdated'
+alias bubc='brew upgrade && brew cleanup'
+alias bubu='bubo && bubc'

plugins/bundler/README.md

@@ -39,7 +39,7 @@ This will exclude the `foreman` and `spin` gems (i.e. their executable) from bei
 
 ## Excluded gems
 
-These gems should not be called with `bundle exec`. Please see the Issues on GitHub for clarification.
+These gems should not be called with `bundle exec`. Please see [issue #2923](https://github.com/robbyrussell/oh-my-zsh/pull/2923) on GitHub for clarification.
 
 `berks`
 `foreman`

plugins/bundler/bundler.plugin.zsh

@@ -4,6 +4,7 @@ alias bp="bundle package"
 alias bo="bundle open"
 alias bu="bundle update"
 alias bi="bundle_install"
+alias bcn="bundle clean"
 
 bundled_commands=(
   annotate

plugins/cabal/cabal.plugin.zsh

@@ -17,13 +17,16 @@ function _cabal_commands() {
       subcommand)
         subcommands=(
           "bench:Run the benchmark, if any (configure with UserHooks)"
-          "build:Make this package ready for installation"
+          "build:Compile all targets or specific target."
           "check:Check the package for common mistakes"
           "clean:Clean up after a build"
-          "copy:Copy teh files into the install locations"
+          "copy:Copy the files into the install locations"
           "configure:Prepare to build the package"
+          "exec:Run a command with the cabal environment"
           "fetch:Downloads packages for later installation"
-          "haddock:Generate HAddock HTML documentation"
+          "freeze:Freeze dependencies."
+          "get:Gets a package's source code"
+          "haddock:Generate Haddock HTML documentation"
           "help:Help about commands"
           "hscolour:Generate HsColour colourised code, in HTML format"
           "info:Display detailed information about a particular package"
@@ -31,7 +34,10 @@ function _cabal_commands() {
           "install:Installs a list of packages"
           "list:List packages matching a search string"
           "register:Register this package with the compiler"
+          "repl:Open an interpreter session for the given target"
           "report:Upload build reports to a remote server"
+          "run:Runs the compiled executable"
+          "sandbox:Create/modify/delete a sandbox"
           "sdist:Generate a source distribution file (.tar.gz)"
           "test:Run the test suite, if any (configure with UserHooks)"
           "unpack:Unpacks packages for user inspection"
@@ -45,3 +51,43 @@ function _cabal_commands() {
 }
 
 compdef _cabal_commands cabal
+
+function _cab_commands() {
+    local ret=1 state
+    _arguments ':subcommand:->subcommand' && ret=0
+
+    case $state in
+      subcommand)
+        subcommands=(
+          "sync:Fetch the latest package index"
+          "install:Install packages"
+          "uninstall:Uninstall packages"
+          "installed:List installed packages"
+          "configure:Configure a cabal package"
+          "build:Build a cabal package"
+          "clean:Clean up a build directory"
+          "outdated:Display outdated packages"
+          "info:Display information of a package"
+          "sdist:Make tar.gz for source distribution"
+          "upload:Uploading tar.gz to HackageDB"
+          "get:Untar a package in the current directory"
+          "deps:Show dependencies of this package"
+          "revdeps:Show reverse dependencies of this package"
+          "check:Check consistency of packages"
+          "genpaths:Generate Paths_<pkg>.hs"
+          "search:Search available packages by package name"
+          "add:Add a source directory"
+          "test:Run tests"
+          "bench:Run benchmarks"
+          "doc:Generate manuals"
+          "ghci:Run GHCi (with a sandbox)"
+          "init:Initialize a sandbox"
+          "help:Display the help message of the command"
+        )
+        _describe -t subcommands 'cab subcommands' subcommands && ret=0
+    esac
+
+    return ret
+}
+
+command -v cab >/dev/null 2>&1 && { compdef _cab_commands cab }

plugins/cakephp3/cakephp3.plugin.zsh

+# CakePHP 3 basic command completion
+_cakephp3_get_command_list () {
+	cakephp3commands=($(bin/cake completion commands));printf "%s\n" "${cakephp3commands[@]}"
+}
+
+_cakephp3 () {
+  if [ -f bin/cake ]; then
+    compadd `_cakephp3_get_command_list`
+  fi
+}
+
+compdef _cakephp3 bin/cake
+compdef _cakephp3 cake
+
+#Alias
+alias c3='bin/cake'
+
+alias c3cache='bin/cake orm_cache clear'
+alias c3migrate='bin/cake migrations migrate'

plugins/cask/cask.plugin.zsh

+if which cask &> /dev/null; then
+  source $(dirname $(which cask))/../etc/cask_completion.zsh
+else
+  print "zsh cask plugin: cask not found"
+fi

plugins/chucknorris/.gitignore

+fortunes/chucknorris.dat

plugins/chucknorris/LICENSE

+License: GPL v2
+Thanks to http://www.k-lug.org/~kessler/projects.html for the fortune file.

plugins/chucknorris/chucknorris.plugin.zsh

+if [ ! -f $ZSH/plugins/chucknorris/fortunes/chucknorris.dat ]; then
+    strfile $ZSH/plugins/chucknorris/fortunes/chucknorris $ZSH/plugins/chucknorris/fortunes/chucknorris.dat
+fi
+
+alias chuck="fortune -a $ZSH/plugins/chucknorris/fortunes"
+alias chuck_cow="chuck | cowthink"

plugins/coffee/README.md

+## Coffeescript Plugin
+
+This plugin provides aliases for quickly compiling and previewing your
+cofeescript code.
+
+When writing Coffeescript it's very common to want to preview the output of a
+certain snippet of code, either because you want to test the output or because
+you'd like to execute it in a browser console which doesn't accept Coffeescript.
+
+Preview the compiled result of your coffeescript with `cf "code"` as per the
+following:
+
+```zsh
+$ cf 'if a then be else c'
+if (a) {
+  b;
+} else {
+  c;
+}
+```
+
+Also provides the following aliases:
+
+* **cfc:** Copies the compiled JS to your clipboard. Very useful when you want
+           to run the code in a JS console.
+
+* **cfp:** Compiles from your currently copied clipboard. Useful when you want 
+           to compile large/multi-line snippets
+
+* **cfpc:** Paste coffeescript from clipboard, compile to JS, then copy the
+            the result back to clipboard.

plugins/coffee/coffee.plugin.zsh

+#!/bin/zsh
+
+# compile a string of coffeescript and print to output
+cf () {
+  coffee -peb $1
+}
+# compile & copy to clipboard
+cfc () {
+  cf $1 | pbcopy
+}
+
+# compile from pasteboard & print
+alias cfp='coffeeMe "$(pbpaste)"'
+
+# compile from pasteboard and copy to clipboard
+alias cfpc='cfp | pbcopy'

plugins/common-aliases/common-aliases.plugin.zsh

@@ -13,7 +13,7 @@ alias lS='ls -1FSsh'
 alias lart='ls -1Fcart'
 alias lrt='ls -1Fcrt'
 
-alias zshrc='vim ~/.zshrc' # Quick access to the ~/.zshrc file
+alias zshrc='$EDITOR ~/.zshrc' # Quick access to the ~/.zshrc file
 
 alias grep='grep --color'
 alias sgrep='grep -R -n -H -C 5 --exclude-dir={.git,.svn,CVS} '

plugins/composer/composer.plugin.zsh

@@ -7,7 +7,7 @@
 
 # Composer basic command completion
 _composer_get_command_list () {
-    $_comp_command1 --no-ansi | sed "1,/Available commands/d" | awk '/^\s*[a-z]+/ { print $1 }'
+    $_comp_command1 --no-ansi | sed "1,/Available commands/d" | awk '/^[ \t]*[a-z]+/ { print $1 }'
 }
 
 _composer_get_required_list () {

plugins/debian/debian.plugin.zsh

@@ -9,8 +9,10 @@
 # You can just set apt_pref='apt-get' to override it.
 if [[ -e $( which -p aptitude 2>&1 ) ]]; then
     apt_pref='aptitude'
+    apt_upgr='safe-upgrade'
 else
     apt_pref='apt-get'
+    apt_upgr='upgrade'
 fi
 
 # Use sudo by default if it's installed
@@ -45,10 +47,10 @@ if [[ $use_sudo -eq 1 ]]; then
     alias abd='sudo $apt_pref build-dep'
     alias ac='sudo $apt_pref clean'
     alias ad='sudo $apt_pref update'
-    alias adg='sudo $apt_pref update && sudo $apt_pref upgrade'
+    alias adg='sudo $apt_pref update && sudo $apt_pref $apt_upgr'
     alias adu='sudo $apt_pref update && sudo $apt_pref dist-upgrade'
     alias afu='sudo apt-file update'
-    alias ag='sudo $apt_pref upgrade'
+    alias ag='sudo $apt_pref $apt_upgr'
     alias ai='sudo $apt_pref install'
     # Install all packages given on the command line while using only the first word of each line:
     # acs ... | ail
@@ -80,10 +82,10 @@ else
     }
     alias ac='su -ls \'$apt_pref clean\' root'
     alias ad='su -lc \'$apt_pref update\' root'
-    alias adg='su -lc \'$apt_pref update && aptitude safe-upgrade\' root'
+    alias adg='su -lc \'$apt_pref update && aptitude $apt_upgr\' root'
     alias adu='su -lc \'$apt_pref update && aptitude dist-upgrade\' root'
     alias afu='su -lc "apt-file update"'
-    alias ag='su -lc \'$apt_pref safe-upgrade\' root'
+    alias ag='su -lc \'$apt_pref $apt_upgr\' root'
     ai() {
         cmd="su -lc 'aptitude -P install $@' root"
         print "$cmd"
@@ -136,7 +138,7 @@ apt_pref_compdef abd "build-dep"
 apt_pref_compdef ac  "clean"
 apt_pref_compdef ad  "update"
 apt_pref_compdef afu "update"
-apt_pref_compdef ag  "upgrade"
+apt_pref_compdef ag  "$apt_upgr"
 apt_pref_compdef ai  "install"
 apt_pref_compdef ail "install"
 apt_pref_compdef ap  "purge"

plugins/dirhistory/dirhistory.plugin.zsh

@@ -49,7 +49,8 @@ function push_future() {
 }
 
 # Called by zsh when directory changes
-function chpwd() {
+chpwd_functions+=(chpwd_dirhistory)
+function chpwd_dirhistory() {
   push_past $PWD
   # If DIRHISTORY_CD is not set...
   if [[ -z "${DIRHISTORY_CD+x}" ]]; then

plugins/dirpersist/dirpersist.plugin.zsh

@@ -11,7 +11,8 @@ if [[ -f ${dirstack_file} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
   [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
 fi
 
-chpwd() {
+chpwd_functions+=(chpwd_dirpersist)
+chpwd_dirpersist() {
   if (( $DIRSTACKSIZE <= 0 )) || [[ -z $dirstack_file ]]; then return; fi
   local -ax my_stack
   my_stack=( ${PWD} ${dirstack} )

plugins/docker-compose/README.md

+# Docker-compose plugin for oh my zsh
+
+A copy of the completion script from the [docker-compose](1) git repo.
+
+[1]:[https://github.com/docker/compose/blob/master/contrib/completion/zsh/_docker-compose]

plugins/ember-cli/README.md

+# Ember-cli
+
+**Maintainer:** [BilalBudhani](http://www.github.com/BilalBudhani)
+
+Ember-cli (http://www.ember-cli.com/)
+
+### List of Aliases
+
+alias es='ember serve'
+alias ea='ember addon'
+alias eb='ember build'
+alias ed='ember destroy'
+alias eg='ember generate'
+alias eh='ember help'
+alias ein='ember init'
+alias eia='ember install:addon'
+alias eib='ember install:bower'
+alias ein='ember install:npm'
+alias ei='ember install'
+alias et='ember test'
+alias eu='ember update'
+alias ev='ember version'

plugins/ember-cli/ember-cli.plugin.zsh

+# Ember ClI 
+# visit http://www.ember-cli.com/ to view user guid 
+
+alias es='ember serve'
+alias ea='ember addon'
+alias eb='ember build'
+alias ed='ember destroy'
+alias eg='ember generate'
+alias eh='ember help'
+alias ein='ember init'
+alias eia='ember install:addon'
+alias eib='ember install:bower'
+alias ein='ember install:npm'
+alias ei='ember install'
+alias et='ember test'
+alias eu='ember update'
+
+# version
+alias ev='ember version'

plugins/emoji/README.md

+# emoji plugin
+
+Support for conveniently working with Unicode emoji in Zsh.
+
+## Features
+
+This plugin provides support for working with Unicode emoji characters in `zsh` using human-readable identifiers. It provides global variables which map emoji names to the actual characters, country names to their flags, and some named groupings of emoji. It also provides associated functions for displaying them.
+
+#### Variables
+
+Variable          | Description
+----------------- | --------------------------------
+  $emoji          | Maps emoji names to characters
+  $emoji_flags    | Maps country names to flag characters (using region indicators)
+  $emoji_groups   | Named groups of emoji. Keys are group names; values are whitespace-separated lists of character names
+
+You may define new emoji groups at run time by modifying `$emoji_groups`. The special group name `all` is reserved for use by the plugin. You should not modify `$emoji` or `$emoji_flags`.
+
+#### Functions
+
+Function         | Description
+---------------- | -------------------------------
+  random_emoji   | Prints a random emoji character
+  display_emoji  | Displays emoji, along with their names
+
+## Usage and Examples
+
+To output a specific emoji, use:
+```
+$> echo $emoji[<name>]
+```
+E.g.:
+```
+$> echo $emoji[mouse_face]
+```
+
+To output a random emoji, use:
+```
+$> random_emoji
+```
+To output a random emoji from a particular group, use:
+```
+$> random_emoji <group>
+```
+E.g.:
+```
+$> random_emoji fruits
+$> random_emoji animals
+$> random_emoji vehicles
+$> random_emoji faces
+```
+
+The defined group names can be found with `echo ${(k)emoji_groups}`.
+
+To list all available emoji with their names, use:
+```
+$> display_emoji
+$> display_emoji fruits
+$> display_emoji animals
+$> display_emoji vehicles
+$> display_emoji faces
+```
+
+To use emoji in a prompt:
+```
+PROMPT="$emoji[penguin]  > ""
+PROMPT='$(random_emoji fruits)  > '
+surfer=$emoji[surfer]
+PROMPT="$surfer  > "
+```
+
+##  Technical Details
+
+The emoji names and codes are sourced from Unicode Technical Report \#51, which provides information on emoji support in Unicode. It can be found at http://www.unicode.org/reports/tr51/index.html.
+
+The group definitions are added by this OMZ plugin. They are not based on external definitions. (As far as I can tell. -apjanke)
+
+The values in the `$emoji*` maps are the emoji characters themselves, not escape sequences or other forms that require interpretation. They can be used in any context and do not require escape sequence support from commands like `echo` or `print`.
+
+The emoji in the main `$emoji` map are standalone character sequences which can all be output on their own, without worrying about combining characters. The values may actually be multi-code-point sequences, instead of a single code point, and may include combining characters in those sequences. But they're arranged so their effects do not extend beyond that sequence.
+
+The exception to this is the skin tone variation selectors. These are included in the main `$emoji` map because they can be displayed on their own, as well as used as combining characters. (If they follow a character that is not one of the emoji characters they combine with, they are displayed as color swatches.)
+
+
+##  Experimental Features
+
+This defines some additional variables and functions, but these are experimental and subject to change at any time. You shouldn't rely on them being available. They're mostly for the use of emoji plugin developers to help decide what to include in future revisions.
+
+Variables:
+
+Variable          | Description
+----------------- | --------------------------------
+  $emoji2         | Auxiliary and combining characters
+  $emoji_skintone | Skin tone modifiers (from Unicode 8.0)
+
+
+#### Skin Tone Variation Selection
+
+This includes experimental support for the skin tone Variation Selectors introduced with Unicode 8.0, which let you select different skin tones for emoji involving humans.
+
+NOTE: This really is experimental. The skin tone selectors are a relatively new feature and may not be supported by all systems. And the support in this plugin is a work in progress. It may not work in all places. In fact, I haven't gotten it to work anywhere yet. -apjanke
+
+The "variation selectors" are combining characters which change the appearance of the preceding character. A variation selector character can be output immediately following a human emoji to change its skin tone color. You can also output a variation selector on its own to display a color swatch of that skin tone.
+
+The `$emoji_skintone` associative array maps skin tone IDs to the variation selector characters. To use one, output it immediately following a smiley or other human emoji.
+
+```
+echo "$emoji[smiling_face_with_open_mouth]$emoji_skintone[4]"
+```
+
+Note that `$emoji_skintone` is an associative array, and its keys are the *names* of "Fitzpatrick Skin Type" groups, not linear indexes into a normal array. The names are `1_2`, `3`, `4`, `5`, and `6`. (Types 1 and 2 are combined into a single color.) See the [Diversity section in Unicode TR 51](http://www.unicode.org/reports/tr51/index.html#Diversity) for details.
+
+##  TODO
+
+These are things that could be enhanced in future revisions of the plugin.
+
+* Incorporate CLDR data for ordering and groupings
+* Short :bracket: style names (from gemoji)
+* Incorporate `gemoji` data
+* Country codes for flags
+* ZWJ combining function?
+
+####  Gemoji support
+
+The [gemoji project](https://github.com/github/gemoji) seems to be the de facto main source for short names and other emoji-related metadata that isn't included in the official Unicode reports. (I'm saying this just from looking at the google results for "emoji short names" and related searches. -apjanke)
+
+If this plugin is updated to provide short names, CLDR sorting data, and similar stuff, it should probably be changed to use the Gemoji project, and the `update_emoji.pl` script be rewritten in Ruby so it can use the Gemoji library directly instead of parsing its data files.
+
+This does *not* mean that it should use Gemoji at run time. None of the `zsh` plugin stuff should call Gemoji or Ruby code. Rather, the "build time" `update_emoji.pl` script should be rewritten to use Gemoji to generate a pure-native-`zsh` character definition file which would be checked in to the repo and can be called by OMZ users without having Gemoji installed.
+
+####  ZWJ combining function
+
+One of the newer features of Unicode emoji is the ability to use the "Zero-Width Joiner" character to compose multiple emoji characters in to a single "emoji ligature" glyph. For example, this is [how Apple supports "family" emoji with various genders and skin tones](http://www.unicode.org/reports/tr51/index.html#ZWJ_Sequences).
+
+These are a pain to write out (and probably worse to read), and it might be convenient to have a couple functions for concisely composing them, if wider support for them appears.

plugins/emoji/emoji.plugin.zsh

+# emoji plugin
+#
+# Makes emoji support available within ZSH
+#
+# See the README for documentation.
+
+_omz_emoji_plugin_dir="${0:h}"
+
+() {
+
+local LC_ALL=en_US.UTF-8
+
+typeset -gAH emoji_groups
+typeset -gAH emoji_con
+typeset -gAH emoji2
+typeset -gAH emoji_skintone
+
+source "$_omz_emoji_plugin_dir/emoji-char-definitions.zsh"
+unset _omz_emoji_plugin_dir
+
+# These additional emoji are not in the definition file, but are useful in conjunction with it
+
+# This is a combinin character that can be placed after any other character to surround
+# it in a "keycap" symbol.
+# The digits 0-9 are already in the emoji table as keycap_digit_<N>, keycap_ten, etc. 
+# It's unclear whether this should be in the $emoji array, because those characters are all ones
+# which can be displayed on their own.
+#emoji[combining_enclosing_keycap]="\U20E3"
+
+emoji[regional_indicator_symbol_letter_d_regional_indicator_symbol_letter_e]=$'\xF0\x9F\x87\xA9\xF0\x9F\x87\xAA'
+emoji[regional_indicator_symbol_letter_g_regional_indicator_symbol_letter_b]=$'\xF0\x9F\x87\xAC\xF0\x9F\x87\xA7'
+emoji[regional_indicator_symbol_letter_c_regional_indicator_symbol_letter_n]=$'\xF0\x9F\x87\xA8\xF0\x9F\x87\xB3'
+emoji[regional_indicator_symbol_letter_j_regional_indicator_symbol_letter_p]=$'\xF0\x9F\x87\xAF\xF0\x9F\x87\xB5'
+emoji[regional_indicator_symbol_letter_k_regional_indicator_symbol_letter_r]=$'\xF0\x9F\x87\xB0\xF0\x9F\x87\xB7'
+emoji[regional_indicator_symbol_letter_f_regional_indicator_symbol_letter_r]=$'\xF0\x9F\x87\xAB\xF0\x9F\x87\xB7'
+emoji[regional_indicator_symbol_letter_e_regional_indicator_symbol_letter_s]=$'\xF0\x9F\x87\xAA\xF0\x9F\x87\xB8'
+emoji[regional_indicator_symbol_letter_i_regional_indicator_symbol_letter_t]=$'\xF0\x9F\x87\xAE\xF0\x9F\x87\xB9'
+emoji[regional_indicator_symbol_letter_u_regional_indicator_symbol_letter_s]=$'\xF0\x9F\x87\xBA\xF0\x9F\x87\xB8'
+emoji[regional_indicator_symbol_letter_r_regional_indicator_symbol_letter_u]=$'\xF0\x9F\x87\xB7\xF0\x9F\x87\xBA'
+
+# Nonstandard alias names
+emoji[vulcan_salute]=$'\U1F596'
+
+
+# Emoji combining and auxiliary characters
+
+# "Variation Selectors" for controlling text vs emoji style presentation
+# These apply to the immediately preceding character
+emoji2[text_style]=$'\UFE0E'
+emoji2[emoji_style]=$'\UFE0F'
+# Joiner that indicates a single combined-form glyph (ligature) should be used
+emoji2[zero_width_joiner]=$'\U200D'
+# Skin tone modifiers
+emoji2[emoji_modifier_fitzpatrick_type_1_2]=$'\U1F3FB'
+emoji2[emoji_modifier_fitzpatrick_type_3]=$'\U1F3FC'
+emoji2[emoji_modifier_fitzpatrick_type_4]=$'\U1F3FD'
+emoji2[emoji_modifier_fitzpatrick_type_5]=$'\U1F3FE'
+emoji2[emoji_modifier_fitzpatrick_type_6]=$'\U1F3FF'
+# Various other combining characters. (Incomplete list; I selected ones that sound useful)
+emoji2[combining_enclosing_circle]=$'\U20DD'
+emoji2[combining_enclosing_square]=$'\U20DE'
+emoji2[combining_enclosing_diamond]=$'\U20DF'
+emoji2[combining_enclosing_circle_backslash]=$'\U20E0'
+emoji2[combining_enclosing_screen]=$'\U20E2'
+emoji2[combining_enclosing_keycap]=$'\U20E3'
+emoji2[combining_enclosing_upward_pointing_triangle]=$'\U20E4'
+
+# Easier access to skin tone modifiers
+emoji_skintone[1_2]=$'\U1F3FB'
+emoji_skintone[3]=$'\U1F3FC'
+emoji_skintone[4]=$'\U1F3FD'
+emoji_skintone[5]=$'\U1F3FE'
+emoji_skintone[6]=$'\U1F3FF'
+
+# Emoji groups
+# These are stored in a single associative array, $emoji_groups, to avoid cluttering up the global
+# namespace, and to allow adding additional group definitions at run time.
+# The keys are the group names, and the values are whitespace-separated lists of emoji character names.
+#
+# These extra local arrays are used to allow more convenient formatting of the source code.
+
+emoji_groups[fruits]="
+  tomato
+  aubergine
+  grapes
+  melon
+  watermelon
+  tangerine
+  banana
+  pineapple
+  red_apple
+  green_apple
+  peach
+  cherries
+  strawberry
+  lemon
+  pear
+"
+
+emoji_groups[vehicles]="
+  airplane
+  rocket
+  railway_car
+  high_speed_train
+  high_speed_train_with_bullet_nose
+  bus
+  ambulance
+  fire_engine
+  police_car
+  taxi
+  automobile
+  recreational_vehicle
+  delivery_truck
+  ship
+  speedboat
+  bicycle
+  helicopter
+  steam_locomotive
+  train
+  light_rail
+  tram
+  oncoming_bus
+  trolleybus
+  minibus
+  oncoming_police_car
+  oncoming_taxi
+  oncoming_automobile
+  articulated_lorry
+  tractor
+  monorail
+  mountain_railway
+  suspension_railway
+  mountain_cableway
+  aerial_tramway
+  rowboat
+  bicyclist
+  mountain_bicyclist
+  sailboat
+"
+
+emoji_groups[animals]="
+  snail
+  snake
+  horse
+  sheep
+  monkey
+  chicken
+  boar
+  elephant
+  octopus
+  spiral_shell
+  bug
+  ant
+  honeybee
+  lady_beetle
+  fish
+  tropical_fish
+  blowfish
+  turtle
+  hatching_chick
+  baby_chick
+  front_facing_baby_chick
+  bird
+  penguin
+  koala
+  poodle
+  bactrian_camel
+  dolphin
+  mouse_face
+  cow_face
+  tiger_face
+  rabbit_face
+  cat_face
+  dragon_face
+  spouting_whale
+  horse_face
+  monkey_face
+  dog_face
+  pig_face
+  frog_face
+  hamster_face
+  wolf_face
+  bear_face
+  panda_face
+  rat
+  mouse
+  ox
+  water_buffalo
+  cow
+  tiger
+  leopard
+  rabbit
+  cat
+  dragon
+  crocodile
+  whale
+  ram
+  goat
+  rooster
+  dog
+  pig
+  dromedary_camel
+"
+
+emoji_groups[faces]="
+  grinning_face_with_smiling_eyes
+  face_with_tears_of_joy
+  smiling_face_with_open_mouth
+  smiling_face_with_open_mouth_and_smiling_eyes
+  smiling_face_with_open_mouth_and_cold_sweat
+  smiling_face_with_open_mouth_and_tightly_closed_eyes
+  winking_face
+  smiling_face_with_smiling_eyes
+  face_savouring_delicious_food
+  relieved_face
+  smiling_face_with_heart_shaped_eyes
+  smirking_face
+  unamused_face
+  face_with_cold_sweat
+  pensive_face
+  confounded_face
+  face_throwing_a_kiss
+  kissing_face_with_closed_eyes
+  face_with_stuck_out_tongue_and_winking_eye
+  face_with_stuck_out_tongue_and_tightly_closed_eyes
+  disappointed_face
+  angry_face
+  pouting_face
+  crying_face
+  persevering_face
+  face_with_look_of_triumph
+  disappointed_but_relieved_face
+  fearful_face
+  weary_face
+  sleepy_face
+  tired_face
+  loudly_crying_face
+  face_with_open_mouth_and_cold_sweat
+  face_screaming_in_fear
+  astonished_face
+  flushed_face
+  dizzy_face
+  face_with_medical_mask
+"
+
+}
+
+# Prints a random emoji character
+#
+#  random_emoji [group]
+#
+function random_emoji() {
+  local group=$1
+  local names
+  if [[ -z "$group" || "$group" == "all" ]]; then
+  	names=(${(k)emoji})
+  else
+  	names=(${=emoji_groups[$group_name]})
+  fi
+  local list_size=$#names
+  local random_index=$(( ( RANDOM % $list_size ) + 1 ))
+  local name=${names[$random_index]}
+  echo ${emoji[$name]}
+}
+
+# Displays a listing of emoji with their names
+#
+# display_emoji [group]
+#
+function display_emoji() {
+  local group=$1
+  local names
+  if [[ -z "$group" || "$group" == "all" ]]; then
+  	names=(${(k)emoji})
+  else
+    names=(${=emoji_groups[$group]})
+  fi
+  # The extra spaces in output here are a hack for readability, since some
+  # terminals treat these emoji chars as single-width.
+  for i in $names; do
+    printf '%s  ' "$emoji[$i]"
+  done
+  print
+  for i in $names; do
+    echo "${emoji[$i]}  = $i"
+  done
+}
+
+

plugins/emoji/update_emoji.pl

+#!/usr/bin/perl -w
+#
+# update_emoji.pl
+#
+# This script generates the emoji.plugin.zsh emoji definitions from the Unicode
+# character data for the emoji characters.
+#
+# The data file can be found at http://unicode.org/Public/emoji/latest/emoji-data.txt
+# as referenced in Unicode TR51 (http://www.unicode.org/reports/tr51/index.html).
+#
+# This is known to work with the data file from version 1.0. It may not work with later
+# versions if the format changes. In particular, this reads line comments to get the
+# emoji character name and unicode version.
+#
+# Country names have punctuation and other non-letter characters removed from their name,
+# to avoid possible complications with having to escape the strings when using them as 
+# array subscripts. The definition file seems to use some combining characters like accents
+# that get stripped during this process.
+
+use strict;
+use warnings;
+use 5.010;
+use autodie;
+
+use Path::Class;
+use File::Copy;
+
+# Parse definitions out of the data file and convert
+sub process_emoji_data_file {
+	my ( $infile, $outfilename ) = @_;
+	my $file = file($infile);
+	my $outfile = file($outfilename);
+	my $outfilebase = $outfile->basename();
+	my $tempfilename = "$outfilename.tmp";
+	my $tempfile = file($tempfilename);
+	my $outfh = $tempfile->openw();
+	$outfh->print("
+# $outfilebase - Emoji character definitions for oh-my-zsh emoji plugin
+#
+# This file is auto-generated by update_emoji.pl. Do not edit it manually.
+#
+# This contains the definition for:
+#   \$emoji         - which maps character names to Unicode characters
+#   \$emoji_flags   - maps country names to Unicode flag characters using region indicators 
+
+# Main emoji
+typeset -gAH emoji
+# National flags
+typeset -gAH emoji_flags
+# Combining modifiers
+typeset -gAH emoji_mod
+
+");
+
+	my $fh = $file->openr();
+	my $line_num = 0;
+	while ( my $line = $fh->getline() ) {
+		$line_num++;
+		$_ = $line;
+		# Skip all-comment lines (from the header) and blank lines
+		# (But don't strip comments on normal lines; we need to parse those for
+		# the emoji names.)
+		next if /^\s*#/ or /^\s*$/;
+
+		if (/^(\S.*?\S)\s*;\s*(\w+)\s*;\s*(\w+)\s*;\s*(\w+)\s*;\s*(\w.*?)\s*#\s*V(\S+)\s\(.*?\)\s*(\w.*\S)\s*$/) {
+			my ($code, $style, $level, $modifier_status, $sources, $version, $keycap_name) 
+				= ($1, $2, $3, $4, $5, $6, $7);
+			#print "code=$code style=$style level=$level modifier_status=$modifier_status sources=$sources version=$version name=$keycap_name\n";
+			my @code_points = split /\s+/, $code;
+			my @sources = split /\s+/, $sources;
+
+			my $flag_country = "";
+			if ( $keycap_name =~ /^flag for (\S.*?)\s*$/) {
+				$flag_country = $1;
+			}
+
+			my $zsh_code = join '', map { "\\U$_" } @code_points;
+			# Convert keycap names to valid associative array names that do not require any
+			# quoting. Works fine for most stuff, but is clumsy for flags.
+			my $omz_name = lc($keycap_name);
+			$omz_name =~ s/[^A-Za-z0-9]/_/g;
+			my $zsh_flag_country = $flag_country;
+			$zsh_flag_country =~ s/[^\p{Letter}]/_/g;
+			if ($flag_country) {
+				$outfh->print("emoji_flags[$zsh_flag_country]=\$'$zsh_code'\n");
+			} else {
+				$outfh->print("emoji[$omz_name]=\$'$zsh_code'\n");				
+			}
+			# Modifiers are included in both the main set and their separate map,
+			# because they have a standalone representation as a color swatch.
+			if ( $modifier_status == "modifier" ) {
+				$outfh->print("emoji_mod[$omz_name]=\$'$zsh_code'\n");
+			}
+		} else {
+			die "Failed parsing line $line_num: '$_'";
+		}
+	}
+	$fh->close();
+	$outfh->print("\n");
+	$outfh->close();
+
+	move($tempfilename, $outfilename)
+		or die "Failed moving temp file to $outfilename: $!";
+}
+
+my $datafile = "emoji-data.txt";
+my $zsh_def_file = "emoji-char-definitions.zsh";
+process_emoji_data_file($datafile, $zsh_def_file);
+
+print "Updated definition file $zsh_def_file\n";
+
+
+

plugins/extract/_extract

@@ -3,6 +3,6 @@
 
 _arguments \
   '(-r --remove)'{-r,--remove}'[Remove archive.]' \
-  "*::archive file:_files -g '(#i)*.(tar|tgz|tbz|tbz2|txz|tlz|gz|bz2|xz|lzma|Z|zip|rar|7z|deb)(-.)'" && return 0
+  "*::archive file:_files -g '(#i)*.(tar|tgz|tbz|tbz2|txz|tlz|gz|bz2|xz|lzma|Z|zip|ipsw|rar|7z|deb)(-.)'" && return 0
 
 

plugins/extract/extract.plugin.zsh

@@ -23,7 +23,7 @@ function extract() {
 
   remove_archive=1
   if [[ "$1" == "-r" ]] || [[ "$1" == "--remove" ]]; then
-    remove_archive=0 
+    remove_archive=0
     shift
   fi
 
@@ -52,7 +52,7 @@ function extract() {
       (*.xz) unxz "$1" ;;
       (*.lzma) unlzma "$1" ;;
       (*.Z) uncompress "$1" ;;
-      (*.zip|*.war|*.jar|*.sublime-package) unzip "$1" -d $extract_dir ;;
+      (*.zip|*.war|*.jar|*.sublime-package|*.ipsw) unzip "$1" -d $extract_dir ;;
       (*.rar) unrar x -ad "$1" ;;
       (*.7z) 7za x "$1" ;;
       (*.deb)
@@ -64,10 +64,10 @@ function extract() {
         cd ..; rm *.tar.gz debian-binary
         cd ..
       ;;
-      (*) 
+      (*)
         echo "extract: '$1' cannot be extracted" 1>&2
-        success=1 
-      ;; 
+        success=1
+      ;;
     esac
 
     (( success = $success > 0 ? $success : $? ))

plugins/fasd/fasd.plugin.zsh

 if [ $commands[fasd] ]; then # check if fasd is installed
-  fasd_cache="$HOME/.fasd-init-cache"
+  fasd_cache="${ZSH_CACHE_DIR}/fasd-init-cache"
   if [ "$(command -v fasd)" -nt "$fasd_cache" -o ! -s "$fasd_cache" ]; then
     fasd --init auto >| "$fasd_cache"
   fi
   source "$fasd_cache"
   unset fasd_cache
+
   alias v='f -e vim'
-  alias o='a -e open'
+  alias o='a -e open_command'
 fi
-

plugins/fbterm/fbterm.plugin.zsh

 # start fbterm automatically in /dev/tty*
 
-if [[ $(tty|grep -o '/dev/tty') = /dev/tty ]] ; then
-	fbterm
-	exit
+if (( ${+commands[fbterm]} )); then
+	if [[ "$TTY" = /dev/tty* ]] ; then
+		fbterm && exit
+	fi
 fi

plugins/forklift/README.md

+## forklift
+
+Plugin for ForkLift, an FTP application for OS X.
+
+### Requirements
+
+* [ForkLift](http://forkliftapp.com/forklift/)
+
+### Usage
+
+* If `fl` is called without arguments then the current folder is opened in ForkLift. Is equivalent to `fl .`
+
+* If `fl` is called with a directory as the argument, then that directory is opened in ForkLift
\ No newline at end of file

plugins/frontend-search/README.md

 ## Rationale ##
 
-The idea for this script is to help searches in important doc contents from frontend.
+> Searches for your Frontend contents more easier
+
 
 ## Instalation ##
 
-I will send a Pull Request with this plugin for .oh-my-zsh official repository. If accept them, it's only add in plugins list that exists in ```.zshrc``` file.
 
-For now, you can clone this repository and add in ```custom/plugins``` folder
-
-```bash
-$ git clone git://github.com/willmendesneto/frontend-search.git ~/.oh-my-zsh/custom/plugins/frontend-search
-```
-
-After this, restart your terminal and frontend-search plugin is configurated in you CLI.
+Open your `.zshrc` file and load `frontend-search` plugin
 
 ```bash
 ...
@@ -20,6 +14,7 @@ plugins=( <your-plugins-list>... frontend-search)
 ...
 ```
 
+
 ## Commands ##
 
 All command searches are accept only in format
@@ -47,6 +42,7 @@ The search content are
 * `angularjs <google.com/search?as_q=<search-term>&as_sitesearch=angularjs.org>`
 * `reactjs <google.com/search?as_q=<search-term>&as_sitesearch=facebook.github.io/react>`
 * `emberjs <emberjs.com>`
+* `stackoverflow <stackoverflow.com>`
 
 
 ## Aliases ##
@@ -72,10 +68,13 @@ There are a few aliases presented as well:
 * `angularjs` A shorthand for `frontend angularjs`
 * `reactjs` A shorthand for `frontend reactjs`
 * `emberjs` A shorthand for `frontend emberjs`
+* `stackoverflow` A shorthand for `frontend stackoverflow`
+
 
 ## Author
 
 **Wilson Mendes (willmendesneto)**
++ <https://plus.google.com/+WilsonMendes>
 + <https://twitter.com/willmendesneto>
 + <http://github.com/willmendesneto>